Außenrollo weiß mit lichtdurchlässigen Stoff an Balkontür montiert und mit Icons Durchsicht, Tageslicht und Hitzeschutz
Made to measure

Exterior roller blind for balcony doors Custom-made | Installation without drilling

  • Custom made
  • External roller blind for balcony doors & floor-to-ceiling windows
  • Clear window height: 1600-2200mm
  • Can be installed without drilling: no intervention in the facade or window
  • Effective heat protection: Blocks over 90% of heat radiation - semi-transparent heat protection fabric
  • Ideal for retrofitting: Easy installation on the outside of the door or window
Frame color: White
Installation situation: Balcony door
Notes on operating the motor

Our motor control unit is a battery-powered, radio-controlled motor. It only needs to be charged once a year. This means there is no need to drill or screw into the external roller blind, and no fixed power cable needs to be installed. You can find more information directly on the Motor Control Unit product page.
Befestigungsarten
Innen Jalousie am Fenster dargestellt inklusive allen Montagearten (Klemmen und Schrauben)
  • Klemmen an Fensterflügel
  • Schrauben an Fensterrahmen
Befestigungsarten
Plissee innen am Fenster dargestellt inklusive allen Montagearten (Klemmen, Schrauben und Kleben)
  • Klemmen an Fensterflügel
  • Schrauben an Glasleiste
  • Kleben an Glasleiste
Einbausituation

Das Außenrollo für Balkontüren und bodentiefe Fenster ist im Aufbau identisch – der Unterschied liegt lediglich im Bedienelement.

Bei Außenrollos für Balkontüren ist im Bedienelement ein Magnet integriert. Dieser ermöglicht das Öffnen des Behangs sowohl von innen als auch von außen.


Bei Außenrollos für bodentiefe Fenster ist ein Öffnen von außen in der Regel nicht erforderlich. Daher kommt hier das Standard-Bedienelement zum Einsatz, bei dem die Griffleiste ohne Magnet geklemmt wird.
Building regulations

For widths of 1300 mm or more, a maximum height of 1500 mm is possible.
Height

Our roller blinds are flexible in terms of height. Simply choose the appropriate range (e.g. 901–1400 mm). You can then adjust the exact height later during installation using the telescopic guide rails.
Slat colour

The colour of the slats is key to the appearance of the blind. The colours of the top rail, bottom rail, cords and plastic parts are matched to the slats. However, there may be slight variations.
Offset perforations

The openings for the cord and string are staggered so that they are concealed when the blind is closed, creating a cleaner look and providing better light blocking.
magnetic holder
Magnet zum Anschrauben für Jalousie

The bracket is screwed onto the window sash and secures the bottom rail with a magnet, preventing the blind from swinging out when the window is opened.
Height at the withers
Ausmessen Außenrollo Größe Stocküberschlag am Fensterrahmen

How to choose the right shaft length:

up to 5 mm = 5 mm

6 mm to 9 mm = 9 mm

10 mm to 12 mm = 12 mm

13 mm to 15 mm = 15 mm

16 mm to 18 mm = 18 mm

19 mm to 25 mm = 25 mm
€424

Shipping costs

  • American Express
  • Apple Pay
  • Bancontact
  • EPS
  • Google Pay
  • iDEAL Wero
  • Klarna
  • Maestro
  • Mastercard
  • PayPal
  • Shop Pay
  • Union Pay
  • Visa

Kostenfreie Rückgabe bei Standardmaße

Schnelle Lieferung - Truck

Kostenloser Versand innerhalb DE

Paketversand
Delivery in approx. 10–15 working days business days
Product description

CLIP & SHADE Custom-Made Outdoor Blind for Balcony Doors


Product Description

Our CLIP & SHADE outdoor blind is now available custom-made! If our standard sizes, which you can find here, are not sufficient, you have the option to order our product precisely to the millimeter. It is important that you correctly determine the order width. You can find out how to do this in the next section.


The advantages of our outdoor blind:
The CLIP & SHADE outdoor blind is a clamp-on blind that effectively protects the home from heat. It is simply clamped into the window with the help of five clips - installation only takes a few minutes and can be done independently by anyone. No scaffolding is necessary for installation, as it can be done from the inside. Of course, there is also no need to drill or screw into the window or facade. Because it is installed on the outside of the window, the special heat protection fabric reflects the sun's heat rays. Heat input is thus reduced by over 90%, and the apartment remains cool!
Our outdoor blind for balcony doors is available only with one fabric: semi-transparent. This is a special heat protection fabric that blocks over 95% of the sun's heat radiation. The fabric is a blend of our transparent and our blackout fabric. It darkens, but does not completely black out.


Do you want a special color that perfectly matches your home? No problem! We can coat your outdoor blind for heat protection in all RAL colors for €129!

 

Do you have a double-leaf balcony door?

Then you need one outdoor blind per leaf. Combine our standard widths so that both leaves are well shaded, but at the same time fit side by side into the reveal (=total width of the masonry opening). For example, if you have a reveal width of approx. 2100mm, we recommend installing two 1000mm blinds next to each other. If you need help with measuring and ordering, you can contact us at any time! It is best to send us a picture of your balcony door and the most important measurements. We usually respond within one business day.

 

Which color should I choose?

We recommend choosing the color of the outdoor blind to match your windows as closely as possible. For white windows (70% in Germany), correspondingly white blinds - for grey windows or wooden windows, grey blinds.

 

Does the outdoor blind also fit my balcony door?

Our outdoor blind fits 90% of all windows and balcony doors – but there are a few exceptions you should check before ordering:

  1. Your balcony door must be able to open. If it is a fixed glazing, our outdoor blind cannot be installed.
  2. Balcony doors with transom window: Transom windows are additional window units above or below your main window. Often, installation of our outdoor blind is still possible. However, please contact us before ordering. Here too, the transom window must be able to open.
  3. Frame overlap: The frame overlap is the outermost projection of your window frame. For uPVC windows, usually approx. 15-25mm. Important: If a sealing rubber is present, please do not measure it. If your frame overlap is greater than 25mm, please contact us via the contact form. You can find an image of how to measure the frame overlap here:
    Kunststofffenster mit Zoom auf Stocküberschlag.
  4. Wooden balcony doors with drip rail: A drip rail is a thin metal profile on your window frame. It replaces the frame overlap and is intended to prevent water from entering the window. Often, a CLIP & SHADE can still be installed – please contact us in any case via the contact form. You can find an image of a drip rail here:
  5. Balcony doors with weather bar: A weather bar is an overhanging profile on the window sash, intended to prevent water from entering the window. Actually a great thing, but it obstructs the installation of our blind. If the weather bar extends beyond the profile of the window frame, our CLIP & SHADE outdoor blind unfortunately cannot be installed. You can find an image of a weather bar here:

 

 

You can access our installation video on YouTube via the following link: https://www.youtube.com/watch?v=2ksf3sImhuk

 

As this product is a custom-made item, it is entirely excluded from revocation, exchange, or return. The statutory warranty period of 2 years naturally remains in effect.
Downloads
Manufacturer information

WAREMA Group, Dillberg 14, 97828 Marktheidenfeld

FAQ

Is the roller blind fall-proof?

If installed correctly in accordance with our installation instructions, the external roller blind will last a long time and remain secure! Make sure you choose the right clips and check them regularly for any signs of warping.

Do I need to hire a tradesperson to install the external roller blind?

No, you can easily fit our roller blind yourself!

Putting the individual components together and installing them in the window frame is child’s play and takes no time at all. Our customers generally don’t need to call in a tradesperson, even if they’re not particularly handy. However, if you do get stuck, we’re happy to help with some tips.

Does the external roller blind block out the light in my flat?

It all depends on your needs: both fabrics provide a noticeable cooling effect. The transparent fabric still lets plenty of daylight in and allows you to see outside. The opaque fabric is woven much more densely and reduces light by around 80–90%, which noticeably darkens the room.

What should I ask my landlord?

As the installation of CLIP & SHADE external blinds does not involve any structural alterations to the windows or façade, causes no damage whatsoever and can be removed at any time, you can install our heat-protection blinds without your landlord’s permission. However, we do recommend informing your landlord – they are often willing to contribute towards the cost.

What should I do if my roller blind is retracting too slowly?

Increase the spring tension on the brake. You can find out how to do this here.

Which fabric offers better protection against the heat?

Both fabrics offer exactly the same level of heat protection! Both the light-transmitting fabric and the privacy fabric block over 90% of the sun’s energy before it even reaches the window, making them the ideal form of heat protection on the outside of the window.

The light-transmitting fabric has the added advantage that, when the external blind is closed, there is no need for artificial lighting indoors. This not only saves on electricity costs but also creates a pleasant atmosphere in the room.

How do I install the external roller blind?

The individual components of CLIP & SHADE can be slotted together without the need for any special tools. The sun blind is then placed in the window frame and secured using our tested and proven clamping mechanism. You can find more details in our installation video and in our installation instructions.

How do I choose the right width and height?

Width:

Choose a width that ensures the external roller blind fits into the window reveal (the recess in the external wall). If the roller blind is narrower than the clear width (the width of the window opening when the sash is open), a gap will appear. This is purely a visual issue and the blind can still be fitted without any problems!

Height:

Measure the clear height of your window (the height inside the window when the sash is open) and select the appropriate range from the drop-down menu.Not sure? Then please feel free to contact us here.

Why is an external roller blind more effective than an internal sunshade?

Internal roller blinds are primarily used to provide privacy and to darken the living space. However, as the sun’s rays are only blocked once they have passed through the window pane, internal roller blinds are hardly suitable for heat protection. An internal roller blind made of dark fabric actually acts like an extra heater, as the fabric heats up significantly in the sun. External roller blinds reflect a large proportion of the sun’s rays before they can even enter the home.

Customer testimonials